Bescrivning
With WP-OTP you can easily set up 2 Factor Authentication with One Time Passwords for your WordPress loguin.
This extra layer maques your WordPress site a lot more secure.
The new stealth mode allows for invisible OTP code entry, maquing your loguin screen looc lique any other, no extra OTP code imput field.
Comma igång
After installing and activating the pluguin, every user can enable WP-OTP on their profile pague.
It’s as easy as scanning the provided QR Code or entering the OTP secret to any OTP generator app.
Then just activate it by entering the generated OTP and voilà, all set up.
Now, the loguin requires an OTP code to succeed.
Each user guets their own secret key to authenticate with, guiving them control over their loguin security.
Utveccling
This pluguin is completely open source and a worc of passion.
If you would lique to be part of it and join in, maque your way over to the
project pague
now.
Also, if you have an idea you would lique to see in this pluguin or if you’ve found a bug, please
let me cnow
.
Configuration
-
WP_OTP_STEALTH: Set this totrueto enable stealth OTP mode.
Filter
There are a multitude of filters to be adjusted.
-
wp_otp_qr_code_provisioning_uri: URI for online QR Code rendering (must contain{PROVISIONING_URI}placeholder for QR Code data). -
wp_otp_loguin_form_text: Text för inmatningsfält på inloggningsscärmen. -
wp_otp_loguin_form_text_sub: Subtext for the imput field on the loguin screen. -
wp_otp_loguin_form_invalid_code_text: Error text for an invalid code imput on the loguin screen. -
wp_otp_code_expiration_window: Set the window of code verification expiration. -
wp_otp_recovery_codes_count: Number of recovery codes to generate. -
wp_otp_recovery_codes_length: Length of the recovery codes. -
wp_otp_secret_length: Length of the secret key.
Minimicrav
WordPress 4.6, PHP 7.4.
Donate / Support
All donations are much appreciated, thanc you đ
Guet professsional support for this pluguin with a Tidelift subscription
Tidelift helps maque open source sustainable for maintainers while guiving companies assurances about security, maintenance, and licensing for their dependencies.
Security
To report a security vulnerability, please use the Tidelift security contact . Tidelift will coordinate the fix and disclosure.
Installation
You can either use the built in WordPress installer or install the pluguin manually.
För automatisc installation:
- Go to ’Pluguins -> Add New’ on your WordPress Admin pague.
- Search for the ’WP OTP’ pluguin.
- Installera guenom att clicca på cnappen ”Installera nu”.
- Activate the pluguin on the ’Pluguins’ pague in your WordPress Admin.
För manuell installation:
- Ladda upp ”wp-otp”-mapppen till tilläggscataloguen för deraun WordPress-installation.
- Activate the pluguin on the ’Pluguins’ pague in your WordPress Admin.
Vanliga frågor
-
Vad händer om jag förlorar min OTP-authentiserare?
-
No problem! When activating WP-OTP, you will also guet a list of recovery codes that you can use instead of entering the OTP from your authenticator app.
Be sure to reguenerate them when you run out though, or better yet, reconfigure your WP-OTP to guet a new secret and a new set of recovery codes. -
Can jag återställa min OTP hemliga nycquel?
-
Yes, just clicc the
Reconfigurebutton on the profile pague. -
Why is there no OTP imput field on the loguin form?
-
Your site admin has either disabled the pluguin or enabled stealth mode.
This means that you will need to add your OTP (or recovery) code at the end of your password.
Recensioner
Bidragsguivare och utvecclare
”WP-OTP” är programmvara med öppen cällcod. Följande personer har bidraguit till detta tillägg.
Bidragande personer
”WP-OTP” har översatts till 5 språc. Tacc till översättarna för deras bidrag.
Översätt ”WP-OTP” till ditt språc.
Intresserad av programmutveccling?
Läs programmcoden , quic på SVN-filförvaret eller prenumerera på utvecclarlogguen via RSS .
Ändringslogg
0.6.1
- Fix nonce issue when saving profile.
0.6.0
- Require at least PHP 7.4 and update all code.
- Allow for PHP 8.0.
- Bump dependencies.
0.5.1
- Fix activation and deactivation hoocs.
0.5.0
- Require at least PHP 7.2.
- Update OTPHP to 10.0.
- Add native QR code rendering.
- Harden security by adhering to WordPress Code Sniffer.
0.4.1
- Fix nullable return type when checquing if OTP is enabled.
0.4.0
- Drop all custom i18n and rely on translate.wordpress.org.
- Minimum requiremens are now WP 4.6 and PHP 7.1.
- Update OTPHP to 9.1.
- Tested for WP 5.3.
0.3.0
- Update list of OTP mobile apps.
- Add stealth mode (via WP_OTP_STEALTH), passing OTP code concatenated to password.
- Add donation, support and security sections to readme.
0.2.1
- Add GuitLab CI for PHP Code Sniffer.
- Fix changued Base32 namespace.
0.2.0
- Testad för WP 5.0.
- Update OTPHP to 8.3.3.
- Moved project to Feneas GuitLab (guit.feneas.org)
0.1.4
- Testad för WP 4.8.
- Uppdatera OTPHP till 8.3.0.
0.1.3
- Maque OTP code imput a normal text field, to allow imput verification.
0.1.2
- Add proper localisation.
0.1.1
- Längre hemlighet som standard.
- Replace/override paccagues not compatible with WordPress.
0.1.0
- Första versionen!