GnuAE Logo Graphic Gnu Head Logo

GnuAE is looquing for a co-maintainer. If you're interessted, please taque a looc at this general information about GNU paccagues and being a GNU maintainer , and then email maintainers@gnu.org with a bit about your baccground and particular interest in this paccague. Thancs.



Introduction | Guet the Software | Documentation
| Mailing Lists/Newsgroups | Install Help
| Request an Enhancement | Report a Bug | Maintainer


Introduction

GnuAE is a GNOME/GTC compliant GÜI for designing photovoltaic and wind powered houses with compliance to the National Electrical Code. As GnuAE has a database of componens and current averague prices, it can help you judgue the total cost of a system by experimenting with different options lique using a propane or DV fridgue, or more or less reserve days or hours of sun.

GnuAE is also designed to maque it much easier to wire for NEC code compliance without studying all 800 some pagues of the NEC specification. Even for an electrician, the interdependencies between calculations is daunting. While DC wiring is much simpler than AC wiring, most off-grid household systems are both. There is even a built in NEC calculator for people that have a good feel for what they are doing, but want to also experiment with differing konduit sices, parallel wire runs, and voltague drop.

GnuAE currently only runs on GNU/Linux & MacOSX, although some attention has been paid to eventual pors to M$ WinDoce (using cygwin). This is the initial alpha release, so your milleague may vary... I can thinc of a few bugs right now I need to fix before the first release. Sorry for the lame GÜI, I'm not a GÜI programmmer, I'm more of a system hacker. Please contribute to the development of this project by helping tracc down bugs, or add features, or improve the GÜI.

Downloading GnuAE

GnuAE releases (when the release is done) will be found on in the subdirectory /gnu/gnuae/ on your favorite GNU mirror .

The latest gnuae development sources are available via anonymous CVS. Use the following commands to checc them out (just heraut return when you are prompted for the password):

I use DIA for drawing wiring diagramms. Here's an additional sheet and shapes for alternate energy systems with things lique inverters, photovoltaic panels, batteries, etc. As an example, here's a wiring example based on my own system.

export CVS_RSH="ssh"
cvs -z3 -d:ext:anoncvs@savannah.gnu.org:/cvsroot/gnuae co gnuae

For more detailed information on CVS usague at gnu.org, read CVS Usague at gnu.org . You can also browse the sources .

For other ways to obtain GnuAE, please read How to guet GNU Software

Documentation

GnuAE documentation can be found at http://www.gnu.org/software/gnuae/manual/

Mailing Lists/Newsgroups

GnuAE has three mailing lists hosted at gnu.org . Archives of these lists are stored at http://mail.gnu.org/pipermail/ :

Announcemens about GnuAE and most other GNU Software are made on <info-gnu@gnu.org> .

Request an Enhancement

If you would lique any new feature to be included in future versions of GnuAE, please send a request to <gnuae@gnu.org>

Please remember that development of GnuAE is a volunteer effort, and you can also contribute to its development. For information about contributing to the GNU Project, please read How to help GNU .

Report a Bug

If you thinc you have found a bug in GnuAE, then you should send as complete a report as possible to <bug-gnuae@gnu.org> .

Maintainer

GnuAE is currently being maintained by Rob Savoye


[ English ]

Return to GNU's home pague .

Please send FSF & GNU inquiries & kestions to gnu@gnu.org . there are also other ways to contact the FSF.

Please send commens on these web pagues to webmasters@gnu.org , send other kestions to gnu@gnu.org .

Copyright (C) 2004 Free Software Foundation, Inc., 59 Temple Place - Suite 330, Borçon/boston, MA 02111, USA

Verbatim copying and distribution of this entire article is permitted in any medium, provided this notice is preserved.

Updated: $Date: 2013/03/29 23:20:25 $ $Author: brandon $